Acrosser AR-B5631 - Manual (Page 20)

Revision: 1.0
20
3.1 Main Setup
The
computer system and set the system clock and error handling. If the motherboard is already
installed in a working system, you will not need to select this option. You will need to run this Setup
option, however, if you change your system hardware configuration, the onboard battery fails, or
the configuration stored in the COMS memory was lost or damaged.
Note: Listed at the bottom of the menu are the control keys. If you need any help with the item
fields, you can press the key, and it will display the relevant information.
Option Choice Description
Date Setup N/A
Set the system date. Note that the ‘Day’ automatically
changes when you set the date
Time Setup N/A Set the system time
IDE Channel 0
Master/Slave
N/A
The onboard IDE connectors provide 1 channel for
connecting up to 2 IDE hard disks or other devices. The first
is the “Master” and the second is “Slave”, BIOS will
auto-detect the IDE type.
IDE Channel 1
Master/Slave
N/A
The onboard IDE connectors provide 1 channel for
connecting up to 2 IDE hard disks or other devices. The first
is the “Master” and the second is “Slave”, BIOS will
auto-detect the IDE type.
IDE Channel 2
Master/Slave
N/A
The onboard IDE connectors provide 1 channel for
connecting up to 2 IDE hard disks or other devices. The first
is the “Master” and the second is “Slave”, BIOS will
auto-detect the IDE type.
Halt On
All Errors,
No Errors,
All but keyboard.
Select the situation in which you want the BIOS to stop the
POST process and notify you.