Acrosser AR-ES6003FL - Manual (Page 52)

APIC Mode Enabled(Default)
Enables APIC (Advanced Programmable Interrupt
Controller) functionality.
Init Display First
On lt)
PEG
Incidentally,PCI slot of riser card can’t install VGA card.
board(Defau
Auto detect VGA output from onboard or output from PCI-E
add-on card when the PCI-E card installed.
Boot Display
CRT(Default)
connecting with M/B.
Select the LVDS+CRT output when LVDS is connecting with
LVDS+CRT
Select the CRT output when CRT is
M/B. However CRT is connecting with M/B or not.
Panel Type
"800
Follow LVDS resolution to choice it.
x 600"
"1024 x 768"
Pre-allocated
Memory Size
8MB(Default)
select the amount of system memory
32MB
64MB
Allow user to
pre-allocated by the internal graphics device.
DVMT Mode
DVM ult)
FIXED
s the mode for dynamic video memory
technology
T(Defa This item set
Graphics Memory
128MB(Default)
256MB
MAX
Specify the size of DVMT memory to allocate for video
memory.
52