Dimplex Electralog Fireplace 7207250100R05 - Manual (Page 11)

11
Maintenance
Remove the light access 3.
cover.
Reach into the opening,
4.
locate and examine the bulbs
to determine which bulb(s)
require replacement.
Unscrew the bulb(s) counter
5.
clockwise.
Insert new bulb(s).
6.
Install the light access cover 7.
and install the screws.
glass Cleaning
the glass is cleaned in the
factory during the assembly
operation. During shipment,
installation, handling, etc., the
front glass panel may collect
dust particles; these can be
removed by dusting lightly with
a clean dry cloth.
To remove fingerprints or other
marks, the front glass panel
can be cleaned with a damp
cloth. The front glass panel
should be completely dried with
a lint free cloth to prevent water
spots. To prevent scratching,
do not use abrasive cleaners or
spray liquids on the clear door
surface.
Compact Fireplace
Surface Cleaning
use warm water only to clean
painted surfaces of the Compact
Fireplace. Do not use abrasive
cleaners.
Servicing
Except for light bulb replacement
and cleaning described above, an
authorized service representative
should perform any other
servicing.
Figure 4
Light Bulbs
screws
Light access
Cover