Dimplex Electralog Fireplace 7207250100R05 - Manual (Page 10)

10 www.dimplex.com
Operation
WARNINg: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of fire, electric
shock or damage to persons.
Light Bulb Replacement
allow at least 5 minutes for light
bulbs and heater to cool off before
touching bulbs to avoid accidental
burning of skin.
Light bulbs need to be replaced
when you notice a dark section
of the flame or when the clarity
and detail of the log exterior
disappears. There are two bulbs
under the log set which generate
the flames and embers.
Helpful Hints
It is a good idea to replace all
light bulbs at one time if they are
close to the end of their rated life.
Group replacement will reduce
the number of times you need
to open the unit to replace light
bulbs.
Light Bulb Requirements
Quantity of 2 clear chandelier
or candelabra bulbs with a J-12
(small) socket base, 60 Watt rat-
ing. Example GE 60BC or Philips
60 CtC .
Replacement:
unplug the unit from power 1.
outlet.
on the back of the Compact
2.
Fireplace remove the screws
from the light access cover
(Figure 4).
Battery Replacement
(Figure 3)
to replace the battery:
slide battery cover open on 1.
the hand held transmitter.
Correctly install one (1) 12
2.
Volt (A23) battery in the
battery holder.
Close the battery cover.
3.
Maintenance