Tr-069 client – D-Link DSL-2640B User Manual

Page 67

Text mode
Original mode

If the log is enabled, the system will log selected events including Emergency, Alert,

Critical, Error, Warning, Notice, Informational, and Debugging. All events above or
equal to the selected log level will be logged and displayed.

If the selected mode is “Remote” or “Both”, events will be sent to the specified IP

address and UDP port of a remote system log server. If the selected mode is “Local”
or “Both”, events will be recorded in the local memory. Select the desired values

and click on Apply to configure the system log options.

TR-069 Client

The router includes a TR-069 client, a WAN management protocol. All the values

are already filled in. If you wish to enable this protocol, then select enable.
If the Connection Request Authentication checkbox is checked, enter the

Connection Request Username / Password. You must click on the Apply button for
the setting to take place.