D-Link DSL-2640B - Manual (Page 66)

65
Remote Log
The Log dialog allows you to view and configure the log. To view the log, click on
the View System Log button.
Below is the System Log screen which shows the date/time of the log, the facility
that was logged, the severity level and the log message. Click on Refresh to view
any new information that is logged.
To configure the system log settings, click on the Configure System Log button to
view the following screen.
NOTE: When you click
on the View System Log
button, the System Log
screen that you access will
be located under the
Status section (see screen
on left). To return to the
previous screen to
configure system log,
remember to click on the
Tools tab (located on top
row) first and then click on
Remotelog.
System Log when log
mode is ENABLED
System Log when log
mode is DISABLED