beautypg.com

Virtual server – D-Link DSL-2640B User Manual

Page 32

background image


31

Virtual Server

If you enable NAT (Network Address Translation), you can configure the Virtual
Server, Port Triggering, and DMZ Host.

NAT—Virtual Servers Setup

A virtual server allows you to direct incoming traffic from the WAN side to a
specific IP address on the LAN side.The following figure shows the screen that

allows you to configure your virtual server(s). Click on the Add button to configure
a virtual server.

Select the virtual server from the drop-down list and complete the server IP address,

then click on Apply once.

See also other documents in the category D-Link Hardware: