Audiovox DT 911 - Manual (Page 16)

~фь
U S m G T H E W A L L M O U N T
ADAPTOR
1. Position the wali mount bracket
oi% the base.
Line up the tabs on the wall mount
adaptor with the holes on the
bottom of the base (Figure 1J,
Snap the wail mount bracket firmly
in place.
2 . Mount the base on the wail.
Position the base so the mounting
studs will nt into the holes on the
bottom of the base. Position the
power
00rd to extend down the wait
the phone is to be mounted on.
Slide the base down on the
mounting studs uritil it locks into
place.
3. Connect the telephone tine cord.
The telephone line cord has э
snap-in plug at each end. Insert
one of the plugs into the jack on the
bottom ot the base, insert the ether
end of the plug Into the wall jack,
4. Plug the AC adaptor into an
electrical outlet and the DC
connector on the back of the
Base Ur^lt,
Figure 2
t6
(TTtll 1 й;аз AM