Delta 17-950L - Manual (Page 9)

1
1. Drill Press Head
2. Table
3. Table Bracket and Column
4. Light
5. Base
6. Chuck
7. Handle
(3)
8. Spindle Adapter
9. Drift Key
10. 5mm Hex Wrench
11. 3mm Hex Wrench
12. Table Raising and Lowering Handle
13. Table Clamp Handle
14. Chuck Key
15. (2) M8x1.25x125mm carriage head screws, (4) flat
washers, (2) lockwashers, and (2) hex nuts (for
fastening drill press to a supporting surface)
16. M10x1.5x40mm Hex Head Screws (4)
17. M6x1x12mm Hex Cap Head Screw (2)
18. 1/4" Washer
19. Cord Strain Relief
20. Cord Clamp (2)
21. Cord Bushing
22. Table insert
23. Screws (2)
24. Springs (2)
25. Forward tilt levers
26. Screws (2)
27. Laser
28. Laser Alignment Rod
29. Hex Head Cap Screws (2)
30. 4mm Hex Wrench
31. 14mm Hex Wrench (Not Shown)
CARTON CONTENTS
UNPACKING AND CLEANING
Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from
unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.
FIRE HAZARD. Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning
your machine. Such materials can easily catch fire. After cleaning, cover the unpainted surfaces with a good quality household
floor paste wax.
9
2
5
4
3
6
7
8
9
10
11
12
13
14
15
16
17
19
20
21
18
22
24
26
25
23
27
28
29
30