Dolby Laboratories DVD Micro Theater System - Manual (Page 33)

E - 32
AUDIO setting
Digital Out
1. Press the SETUP button.
2. Use or button to select Audio, press the ENTER button.
3. Use
or button to select Digital Out, and then press the ENTER button repeatedly to select Digital Out type.
4. To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
L/R Speaker
1. Press the SETUP button.
2. Use or button to select the Audio, press the ENTER button.
3. Use
or button to L/R Speaker, and then press the ENTER button.
4. Use or button to select the desired setting, and then press the ENTER button.
5. To exit the FUNCTION SETUP MENU and return to the normal screen, press the RETURN button.
Note :
• You can adjust the channel balance on your Unit. Please see "ADJUSTING THE SOUND" on page 17.
L/R Speaker
Small : Small size of Speaker.
Large : Large size of Speaker (speaker diameter normally larger than 4 inch or 10 cm)
(continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page)
CUSTOMIZING THE FUNCTION SETTINGS
Raw : Does not have a Dolby Digital Decode.
PCM : Do have a Dolby Digital Decode.