D-Link DVC-1000 - Manual (Page 21)

21
Using the DVC-1000 (continued)
The DVC-1000 can connect with other DVC-1000 VideoPhones throughout the
world. During the setup of the DVC-1000, you entered a Country code into
the Personal Information screen, along with an Area code and a Phone
number. To make calling a VideoPhone similar to using a regular telephone,
you enter VideoPhone numbers in a format similar to your local telephone
system.
Videocalls can be made using the remote control from the Manual Dial screen or
from an attached telephone. When using a telephone, the Country code and
Area code must be dialed along with the Phone number on all calls.
After entering the number into the Phone number box when using the remote
control to make a call, click on the Dial button to begin the VideoPhone call.
Calling a VideoPhone with the Same Country & Area Codes
In the Manual Dial screen, the Country code and Area code you entered for
your VideoPhone are set as the default entries. To complete a call to another
VideoPhone with the same Country and Area codes (i.e., a local video call),
simply enter the Phone number of the party you are calling.
Example: The VideoPhone you are calling has the local VideoPhone number
of 555-1212, you would leave the default Country and Area code boxes and
enter phone number 5551212. To make this call with a telephone handset, you
would dial 12125551212 (Country code+Area code+phone number.)
Entering Phone Numbers
1
212
5551212