D-Link DVC-1000 - Manual (Page 11)

11
Using the Setup Wizard (continued)
Network Address Screen
Fixed IP is used when connecting
to a broadband connection that
offers static IP addressing or
when behind a router that is not
configured for static DHCP. This
choice requires the input of
specific IP address information.
The Network Address screen asks for information that is needed to connect
a DVC-1000 call over the Internet. There are three types of network connections
to choose from: DHCP, Fixed IP and PPPoE. If you do not know which to
choose or you do not have enough information to complete this section, please
contact your ISP or Network Administrator for assistance.
DHCP is used when connecting
directly to a broadband modem
that offers dynamic IP addressing
or when behind a router/DHCP
server that offers static DHCP.