D-Link DVC-1000 - Manual (Page 15)

15
Using the DVC-1000
Layout of the i2eye Main Screen
Main
Window
Self-View
Window
Main
Settings
Buttons
Banner
Window
Status
Message
Area
Status
Icons
Privacy
Status
Icons
Status Icons
The Status Icons appear only briefly at startup. The DVC-1000 uses icons to
indicate its status. The icons display on the top right side of the Main Screen. If
an icon is displayed, this indicates the operation is not complete. The icon will
disappear after the operation completes. If the icon appears with a yellow “X”
through it, this means the operation was unsuccessful. This is a list of the status
icons:
After the DVC-1000 VideoPhone is setup by using the Setup Wizard, you will
see the above Main Screen each time you turn on the VideoPhone. There is a
larger Main Window that displays the self-view until a call is connected and
then displays the party you are calling. The smaller Self-View Window then
displays the self-view when a call is connected. To flip the images that are in
the Main Window and Self-View Window press the Self/Remote button on
the remote control.
Obtaining the Public IP address (Router’s Address)
DVC-1000 is registering with the Directory Service
Checking for i2eye updates
Ready for call