Directed Electronics SR6000 - Manual (Page 38)

3 38 8
and .......................operate............................Channel 4
and ......................operate............................Channel 5
, and operates Temperature check
operates Remote extended functions/LCD backlight
and operates Battery Saver Mode
and operate Beep/Vibrate Notification
and operate Time/Alarm Display
and operates Parking Timer
The standard configuration for both of the above transmitters also allow the user to utilize Multi-Level Security
Arming (described in the following section).
m muullttii--lleevveell sseeccuurriittyy aarrm miinngg
Multi-Level Security Arming is a feature that allows the user to select which of the system's inputs or sensors
will be active and which will be bypassed when the system is armed. (See Table of Zones section of this guide.)
Multi-Level Security Arming can only be accessed from a standard configuration transmitter. Pressing the arm
button of the standard configuration transmitter again within five seconds of arming the system will activate the
Multi-Level Security feature. Each time the arm button is pressed again, a different security level is selected. The
different levels of security are selected as follows:
■ Pressing
one time: The siren chirps once. The system is armed.
■ Pressing
a second time within five seconds: The siren chirps twice followed by a long chirp. Zone
Two is now bypassed.
■ Pressing
a third time within five seconds: The siren chirps three times followed by a long chirp. Zone
Four is now bypassed.
LLCCD D 2 2--w waayy -- o on nllyy -- cco on nffiig gu urraattiio on n