Delta Electronics SMT Power Inductor S 523 User Manual
Smt power inductor, S 523 type i, Electrical characteristics
Electrical Characteristics :
RoHS compliant.
Low profile (2.3mm max. Height) SMD type.
Unshielded.
Self-leads ,suitable for high density mounting.
High energy storage and low DCR.
Provided with embossed carrier tape packing.
Ideal for power source circuits, DC-DC converter, DC-AC inverters
inductor applications.
In addition to the standard versions shown here, customized inductors
are available to meet your exact requirements
Features
SMT Power Inductor
DELTA ELECTRONICS, INC.
(TAOYUAN PLANT CPBG)
3
252, SAN YING ROAD, KUEISAN INDUSTRIAL ZONE, TAOYUAN SHIEN, 333, TAIWAN, R.O.C.
TEL: 886-3-3591968; FAX: 886-3-3591991
http://www.deltaww.com
1. Tolerance of inductance: 15% for 3.9~8.2uH, 10% for 10~47uH.
2. Irated is the DC current which cause the inductance drop less than 10% of its nominal inductance
without current and the surface temperature of the part increase less than 45
3. Operating temperature : -20
to 105
(including self-temperature rise).
o
C.
o
o
C
C
25
100KHz, 0.1V
o
C,
DCR
( ) MAX
Irated
(Adc)
2
L
(uH)
1
.
SI523 - 3R9
3.9
0.068
1.60
SI523 - 4R7
4.7
0.087
1.45
SI523 - 8R2
8.2
0.150
1.10
SI523 - 100
10.0
0.195
1.00
SI523 - 150
15.0
0.260
0.90
SI523 - 220
22.0
0.383
0.67
SI523 - 470
47.0
0.750
0.44
S 523 Type
I
Mechanical Dimension :
B
C
4.0
1.0
5.2
D
A
UNIT:mm/inch
A = 4.5 0.15 / 0.177 0.006
B = 4.0 0.15 / 0.157 0.006
C = 2.3/0.091 Max.
D = 1.0 0.2 / 0.039 0.008
¡У
¡У
¡У
¡У
¡У
¡У
RECOMMENDED PAD PATTERNS
PART NO.