Tteplaeing the inferior tight bulb, Cleaning anti taro – Beko RBI 2301 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

B) freezer compartment
Defrosting is very straightfon^ard ond without
mess, thanks to a special defrost collection
basin.
Defrost twice a year or w/ien a frost layer of
around 7 (1/4”) mm has formed. To start the
defrostmg procedure^ switch off the appliance
at the socket outlet and pull out the moins plug.
All food should be wrapped in several foyers
of newspaper and stored in a coal place (e.g.
fridge or larder).
Containers af warm water may be placed
carefully in the freezer to speed up the defrosting.
Do not use
pointed or sharp-edged
objects^ such as knives or forks to
remove the frost.
Never
use hairdryers^ electrical heaters
or other such electrical appliances for
defrosting.
Sponge out the defrost water collected in the
bottom of the freezer comportment. After
defrosting, dry the interior thoroughly Insert the
piug into the waif socket ond switch on the
electricity supply.
tteplaeing the
inferior
tight bulb
Should the light foil, switch off at the socket
outlet and pull out the moins plug.
Then ensure the bulb is screwed securely in the
bulb holder. Replace the plug and switch on.
If the light still fails, obtain a replacement El 4
screwcap type 15 Watt (Max) bulb from your
local electrical store ond then fit it
(FigM A). Carefully dispose of the burntout light
bulb immediately.
Cleaning anti taro
1, We recommend that you
off the
appliance at the socket outlet and pull
ol
//
mains plug before cleaning.
2,
Never use any sharp instruments or abrasive
substances, soap, household cleaner, detergent
or wax polish for cleaning
3* Use luke warm water to dean the cabinet
of the appliance and wipe it dry
4, Use a damp cloth wrung out in a solution
of one teaspoon of bicarbonate of soda to one
pint of water to dean the interior ond wipe if
dry.
5* Make sure that no water enters the
temperature control box.
Ô* If the appliance is not going to be used for
a long period of time, switch it off, remove all
food, clean it and leave the door ajar
7, We recommend that you polish the metai
parts of the product (i.e. door exterior, cabinet
sides) with a silicone wax (car polish) to protect
the high quality paint finish.
8, Check door seals reguiariy to ensure they
are clean and free from food particles.
9, Never:
• Clean the appliance with unsuitable material;
eg petroleum based products.
• Subject it to high temperatures in any way,
• 5cOL/r, rub etc., with abrasive material.
10, Removal of dairy cover and door tray :
• To remove the dairy cover, first lift the cover
up by about on inch and puH it off from the
side where there is
an
opening on the cover
• To remove a door tray, remove all the contents
and then simply push the door tray upwards
from the hose.