Altec Lansing 9444B User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating and Service Instructions for the Altec Lansing 9444B Power Amplifier
made. Refer to Figure 3.
3.
Verify that the output
connections are prof>erly
made. Refer to Figure 4.
4.
Check the input and out
put cables for proper
wiring and continuity.
5.
Check the signal source
and the load.
8.
Insure that the two jump
ers for each octel socket
are properly installed (if
not using optional plug-in
modules).
Insure that any accessory
modules installed do not
draw more than 25 ma
DC of current.
Check that the mode
switch is in the desired
position.
NOTICE: Repairs performed by
other than authorized warranty
stations (Dealers) or qualified
persomiel shall void the warranty
period of this unit. To avoid loss
of warranty, see your nearest Altec
Lansing authorized dealer, or call
Altec Lansing Customer Service
directly at (405) 324-5311, FAX
(405) 324-8981, or write:
Altec Lansing Customer
Service/Repair
10500 W. Reno
Oklahoma City, OK 73128
U.SA.
AJLTEC LANSING^ CORPORATION • a Mark IV Company