ATEN AS-402PII - Manual (Page 9)

AS/2 -WARE (For AS-402PII Only) AS/2 Auto Switch
4 AS/2 -WARE (For AS-402PII Only)
4-1 AS/2-WARE, HOT KEY CONTROL PROGRAMS
The AS/2-WARE contains few neskient eiiecution files which function tike
a hot key controller- it performs functions like selecting the desired port for
user's application and broadcasting the input data to all output ports by
pressing two or three specified keys at the same time. The detailed information
will be explained in the next section-
4-2 HOW TO USE THE AS/2-WARE
There is a diskette named AS/2-WARE which is enclosed within the
product- This section will instruct you on how to use the AS/2-WARE with the
AS/2.
Assuming your floppy disk drive is In drive "A", insert the diskette into the
floppy drive A and type:
or where the '2' mea ns the ’ LPT2 '.
When the AS/2-WARE program is loaded, user can press the Hot Keys
to switch the output port to the desired one at any time.
There are three kinds of choices the user has to switch the AS/2 Auto
Switch by using the AS/2-WARE. They are
* Switch output port to Port A,
* Switch output port to Port B, and
* Broadcast data to two output ports, Port A and Port B,
AS/2 Auto Switch AS/2 -WARE (For AS-402FH Only)
The AS/2-WARE supports more than three sets of Hot Keys for the user
in case of some applications using the same keys. The following descriptions
are one set of Hot Keys and their operating methods.
A) Switch to Port A:
[
etri L-Sht
B) Switch to Port B;
etri L-Sht
+ 6
e) Broadcast to Port A and Port B;
Ctrl L-Sht
The more detailed information about AS/2-WARE is saved in "READ.ME'
file which can be found in the AS/2-WARE Floppy diskette.
If the user has any product support issues or questions, pfease call your
dealer for assistance.
Note: means the Left Shift key.
12 User's Manual User's Manual 13