Quick start instructions, The control panel, Program definition – ASKO T731 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

QUICK START INSTRUCTIONS
NOTE: To get the best performance from your dryer, read all operating Instructions before using It for the first time.
THE CONTROL PANEL
Power Button
LED Window
Power
Indicator
Light
Start Button
Stop Button
Beiow is a brief summary ofthe operating instructions. Refer to pages 11 and 12 for detaiied instructions.
1. Press the Power Button. The Power indicator Light
will glow to indicate the machine is on.
2. Load the laundry.
3. Turn the Program Knob to the desired program. (See
the table below for program descriptions.)
4. Select options. (See pages 11 and 12 for detailed
definitions and operating instructions).
Time - If you set the program knob to Timed Dry
or Air Fluff, you must select the length of drying time
by pressing this button until the minutes you wish to
dry the load displays
Anti-crease - The Anti-crease option prevents
garments from wrinkling if you’re unable to remove
them right away. You can select one, two, or three
hours by pressing the Anti-crease button until the
number of hours you prefer display.
A
Buzzer - Press this button to set the buzzer
to sound for three seconds when the program is
complete. The indicator light will stay lit when this
option s on.
Delayed Start - Press the button until the number
of hours you wish to delay starting the machine
displays on the LED. You can set delayed start from
1 to 24 hous.
CD Temperature Control -You have two temperature
options: Normal and Low. The Normal setting should
be used for heavier fabrics, the Low setting for lighter,
more delicate fabrics. The indicator light will stay lit
when Low is selectd.
'Cool-Down - Every program ends with a cool
down cycle that tumbles the clothes without heat for
a few minutes to reduce wrinkling. The Cool-down
button lets you choose between a Normal cool-down
cycle (15 minutes) or a Quick cool-down cycle (5
minutes). The indicator light will stay lit when Quick
Cooling is selected.
5. Press Start to start the program. (If you set a delayed
start time, the LED will display the number of hours
the unit was set to delay and the unit will start after
that time has expired.)
6. “End” will display when the program has finished.
NOTE:
Refer to “Important Safety Instructions” on page
2 for a list of specific materials that should never
be put in a tumble dryer.
Program
Definition
Extra Dry (PI)
For items that are extremely difficult to dry, such as jeans and thick towels.
Dry (P2)
Cotton w/out elastic and/or decorative trim.
Normal Dry (P3)
Cotton with elastic and/or decorative trim, linen (white and colorfast).
Iron Dry (P4)
Synthetics, polyester, cotton/polyester blends.
Timed Dry
Anv fabric that can be machine dried. (See note below.)
Air Fiuff
This setting does not heat. It simply circulates the air as the clothes tumble to shake out the
dust and refresh the clothes. (See note below.)
NOTE: When using Timed Dry and Air Fluff, you must set the number of minutes for the program to run by pressing
the Time button until the appropriate number of minutes displays on the LED.
Art. No. 80 656 74 Rev. 03
Page 20