Audiovox MVX507 - Manual (Page 17)

CAUTION: Keep the record of new code in a safe place!
Note: If you enter a wrong code in step 2, your phone
will return to standby mode.
KEYPAD (DTMF) TONES
Dual Tone Multi-Frequency (DTMF), or “Keypad Tone” sig­
nals can be transmitted during a call by entering digits on
the keypad or recalling numbers from the memory. By send­
ing the DTMF signals, you can access special services such
as voice mail and answering machines that require long du­
ration tone.
Keypad (DTMF) Tones Duration Selection
To toggle the Long Tone and Short Tone for the time dura­
tion of DTMF tones, press
<|^.
Keypad (DTMF) Tones Mute during conversa­
tion
To mute the keypad (DTMF) tone, press (@, during
conversation.
To enable the keypad (DTMF) tones, press @), again
during conversation.
Sending DTMF Tones During a Call
From the Keypad:
1. During a call, press any key on the keypad.
From the Memory:
1. During a call, press
2. Enter a 2-digit memory location (01-89).
TIMER AND COUNTER FUNCTIONS
Elapsed Time Display
You can display the elapsed time of the current call or last
call while not in use.
1. Press (§), <1^,
“T ip !0 r iPi: ss” will be displayed, (mm: Minutes, ss:
Seconds)
2. Press @) to exit this mote.
Note: The time count will automatically reset to 00:00
after 99 minutes and 59 seconds.
30
Outgoing Cali Timer
You can display your outgoing call time.
1. Press @), < 3 ^, (5^.
2, Enter your 2-digit Call Timer code.
Note: Please contact your authorized Audiovox dealer to
check your initial Call Timer code.
“Outgo - T hhhh : iPPi” will be displayed, (hhhh: Hours, mm:
Minutes)
To exit this mode, press @),
To reset the Outgoing Call Timer to 00(X):00, press •
Note: The timer will automatically reset to 0000:00 af­
ter 9,999 hours and 59 minutes.
Cumulative Call Timer
You can display a running total of on-air usage.
1. Press (0), C|^, <1^.
2. Enter your 2-digit Call Timer code.
Note: Please contact your authorized Audiovox dealer to
check your initial Call Timer code.
“Total - T hhhh: rnr i” will be displayed, (hhhh: Hours, mm:
Minutes)
To exit this mode, press @).
To reset the Cumulative Call Timer to 0000:00, press
Note: The timer will automatically reset to 0000:00 af­
ter 9,999 hours and 59 minutes have been accu­
mulated.
Temporary Accumulated Call Counter
You can display the temporary accumulated number of calls.
1. Press @), (^5^,
“Ca 11 KKhX” will be displayed. (XXXX: Number of,
calls)
To exit this mode, press @).
To reset the total number to 0000, press
Note: The call counter will automatically reset to 0 after
9,999 calls.
31