Audiovox MVX507 - Manual (Page 15)

LINK DIALING
When you receive service such as Voice Mail from your cel­
lular service provider, you can dial a number and make Link
Dialing with key only.
Five Link Dialing Memories (Ml to M5) are provided with
your phone.
Storing Number in Link Dialing Memory
1. Enter a number to be stored.
2. To store the number as non-secret number, press @) (¿5^
and enter Link Dialing Memory Number.
To store the number as secret number, press @) («5^
<55* and enter Link Dialing Memory Number.
Note: Maximum 16 digits can be stored in each Link
Dialing Memory. When you try to store more than
16 digits, the lastly entered 16 digits are valid.
Recalling number from Link Dialing Memory
1. To recall a non-secret number from a Link Dialing
Memory, press and enter Link Dialing Memory
Number.
To recall a secret number from a Link Dialing Memory,
press
3 digit lock code, and enter Link
Dialing Memory Number.
Making Link Dialing
1. To display a Link Dialing Number stored in “Ml”, press
Note: When the Link Dialing number is stored as secret,
“Secr et” will be displayed.
To dial the Link Dialing Number and activate Link Dial­
ing, keep holding C^).
2. To transmit DTMF signals for numbers stored in M2 to
M5, press each time during conversation.
Notes: • When the number is stored as secret number,
“Secret” will be displayed.
• When PIN mode is ON, “P i H” will Hash.
In this case, press (^) or to send the PIN
first.
3, To exit from Link Dialing mode, press (c^.
26
ONE TOUCH DIALING
By using Link Dial Memory Ml, you can place a call with
key after storing a telephone number in the one touch
memory assigned to key.
Storing in the One Touch Memory
1. Press then enter a telephone number.
2, Press @>,
Note: The stored telephone number can be reviewed by
pressing ®), dis­
placing a Call with One Touch Memory
1. Press and hold
2 . The telephone number will be displayed, and the !N USE
indicator will light as the call is placed.
PROGRAMMABLE ONE TOUCH EMER­
GENCY CALL
You can place an emergency call with key alone, even
when your phone is in lock and/or call restriction mode. 911
is the preset emergency number. You can reprogram this num­
ber with another number (up to 7 digits) if you wish. Also,
you can deactivate this feature to avoid an unintentional call
by mistake.
Placing One Touch Emergency Call
1. Press and hold for 2 seconds.
The pre-programmed emergency number will be displayed,
and the IN USE indicator will light as the call is placed.
One Touch Emergency Call ON/OFF
1. Press di«).
2. Enter your 3-digit Unlock code.
3. Press ® to select “on”, or ® to select “of ”.
4. Press <51)10 store.
5. Press to clear the display.
Programming a New Emergency Number
1. Press dli)-
2. Enter your 3-digit Unlock code.
3. Enter a new emergency number (Max, 7 digits).
4. Press <53) to store.
5. Press to clear the display.
27