Avanti BCA31SS - Manual (Page 9)

CARE AND MAINTENANCE
> Defrosting Your Beverage center
Defrost the beverage center when the frost accumulated on the evaporator is about 5mm (1/5 inch)
thick. Set the thermostat dial to “0" position. Remove frozen or perishable foodS; Defrosting usually
takes a few hours. After defrosting, return the thermostat dial to the desired position. To defrost
quickly remove all foods from the beverage center and leave the door open. Never use a knife or
other metal instrument to scrape ice/frost from the evaporator.
> Reversing the Door Swing of Your Beverage center
This appliance has the capability of the door opening from either the left of right side. The unit is
delivered to you with the door opening from the left side. Should you desire to reverse the opening
direction, please call service for reversal instructions.
> Cleaning Your Beverage center
• Turn the temperature control to "0", unplug the beverage center, and remove the food, shelves,
and trays.
• Wash the Inside surfaces with a warm water and baking soda solution. The solution should be
about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves and trays with a mild detergent solution.
• The outside of the beverage center should be cleaned with mild detergent and warm water.
• Wring excess water out of the sponge or cloth before cleaning the area of the controls, or any
electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with
a clean soft cloth.
> Vacation time
• Short vacations: Leave the beverage center operating during vacations of less than three weeks.
• Long vacations: If the appliance will not be used for several months, remove a!! food and unplug
the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave
the door open slightly: blocking it open if necessary.
> Moving Your Beverage center
Remove all the food.
Securely tape down all loose items inside your beverage center.
Turn the leveling screws up to the base to avoid damage.
Tape the door shut.
Be sure the beverage center stays secure in the upright position during transportation. Also
protect the outside of beverage center with a blanket, or similar item.
Energy Saving Tips
The beverage center should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
Let hot foods cool to room temperature before placing in the beverage center. Overloading the
beverage center forces the compressor to run longer.
Be sure to wrap foods properly, and wipe containers dry before placing them in the beverage
center. This cuts down on frost build-up inside the beverage center.
Beverage center storage bin should not be lined with aluminum foil, wax paper, or paper toweling.
Liners interfere with cold air circulation, making the beverage center less efficient.
Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.