Arrange cutlery and crockery in baskets, Push baskets into machine, Close door – AEG FAVORIT 146 User Manual

Page 13: Check rinse-ald level indicator, Turn off the water tap, Operating procedure water softener

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Operating procedure

Water softener

If noi permanently connected, hang

the

outlet pipe over the sink and atta^ the

inlet hose to the

vrater tapL

Plug the maclilne Into the wall socket or,
In the case of a permanent connection,
switch on.

Turn on the water tap. Open the door.

Arrange cutlery and crockery In baskets.

Push baskets Into machine.

Put 2 level tablespoom of cleaning agent
In the dispenser, and when using the In
tensive programme, pour the same quan
tity into the door recess.

Close door.

Check rinse-ald level Indicator.

Check salt level Indicator for water softe

ner (see page 14).

Press programme button until the rinse

aid ievel Indicator ilghts up and the pro
gramme indicator moves from O-positlon
and the programme starts.

The programme indicator progresses with

the programme.

it remains stationary during the wash and

final rinse until the required temperature

has been reached.

When the programme Is finished, the

machine will stop automatically. Press the

off button. The rinse aid level indicator

light will go out.

Turn off the water tap.

Remove the plug from the wall socket, or

switch off. Do not remove the crockery
Immediately from the machine — leave It
in for a few minutes, with the door left
slightly ajar.

We recommend that you empty the lower

basket first and then the upper basket.

Your dishwasher has been provided with

a water softener, which gives you soft,

lime free water tor the rinses. This greatly

aids the cleaning process and prevents

chalky patches.

All you need to do is to top up the salt

container from lime 1o time.

Before using the machine for the first time,
lift out the lower basket, unscrew the cap

from the salt container and fill it with wa
ter. Place the funnel over the opening and

pour the salt into the container until it is

full to the top. Some water will overflow
which will be pumped off at the start of the

next programme.

Clean any surplus salt from the thread of

the container and replace the cap.

Replace the basket.

The machine is ready for use.