Aiwa CT-FX729M - Manual (Page 6)

SETTING THE CLOCK RADIO OPERATION
You can turn the unit on by pressing any button
except OPEN on the front panel.
1
With the unit on, press and hoid SEL for
more than 2 seconds until the clock
indication appears.
V i M H M M 1 1 n 1 1 1 1
(D-nn
^ MM (L-UU
1 I 1 I I ! ! I 1 I I I i I I M '
2
Press TUNE T to set the hour.
Press TUNE
k
to set the minute.
3
Press SEL to start working the clock
from 0 second.
Having the clock displayed while in Radio, Tape
Play or CD Changer Play mode
Press DISP repeatedly until the clock is displayed.
The clock display appears for 5 seconds, then the
unit returns to its former display.
Each time you press DISP, the display changes
as follews.
RadiofTape Play/CD Changer Play indication
Clock
_ _ I
1
2
Press BAND to turn the radio on.
The radio frequency appears.
Press BAND again to select the band
from among F1 (FM1), F2 (FM2), F3
(FM3), A1 (AM1) and A2 (AM2).
The band indications appear cyclically in
order.
•FI, F2 and F3 share the same frequency
range.
• A1 and A2 share the same frequency range.
Band indication Frequency indication
Press (more than 2 seconds) either
TUNE Tor TUNE A to tune in the desired
station.
The unit starts scanning and tunes in a station
automatically (seek tuning).
Press TUNE T to decrease and TUNE A to
increase the frequency.
Press the button again to cancel seek tuning.
Repeat the procedure until the desired station
is tuned in.
Note
If you press (less than 0.5 second at a time)
either TUNE T or TUNE A, the frequency
decreases or increases step by step.
Adjust the volume with +/—.
5
ENGLISH