AudioBahn Audiobah XM Ready A1100N - Manual (Page 14)

• SWITCHING TO XM MODE
Press MOD button (6) shortly to seleot
XM mode.
• SELECTING USER-PRESET
CHANNEL
At XM mode, the XM user-preset
ohannel group (3 ohannels) is toggled
oyelioally through the group by quiokly
pressing the BND/LOU button (13). The
ohannel will ohange in the following
order:
|-►XM1 -I«- XM2-^>► X^3
• SELECTING CHANNEL UP/DOWN
Press the TUNE/TRAC^^i button (17)
or TUNE/TRAC^^ button (16) to
seleot the ohannel up or down.
• SEARCHING CHANNEL
When the AS/PS button (18) is pressed,
the ohannel searohes for eaoh user
preset ohannel from XM1 to XM2 to
XM3.
When an available ohannel is detested,
the ohannel will be held at that preset
number and play for 5 seoonds. After
that, it will mute and searoh for another
available ohannel.
• STCRING PRESET CHANNELS
The preset buttons (14) oan be used to
store 6 ohannels for oonvenient assess
to your favorite ohannels.
- Programming ohannels
1. Seleot the desired ohannel you
want to store in memory.
2. Press and hold one of the preset
buttons (14) for more than 2
seoonds until the oorresponding
preset button number appears.
Repeat steps 1. and 2. to program
additional ohannels.
- Quioktuning
Press one of the six preset buttons
(14) shortly to seleot a preset ohannel
direotly.
• XM MCDESELECTICN
Press LCC/XM-MCD button (2) to
switoh Category mode, Direot Tune
mode or normal. It is used as the
XM OPERATION
c:
seleotion of eaoh:
Normal-i* *' Category mod^*^ Direct Типе и^е
When Category mode is engaged, the
“CATEGORY” funotion is turned on in
the display. When Category mode is
released, the “CATEGORY” funotion is
turned off. When Direot mode is
engaged, “DIRECT” of alphanumerio
display is turned on.
Select Category and TUNE UP/DCWN
within selected Category
Use CD/DIR/CAT A button (25) or
CD/DIR/CAT T button (24) to seleot
desire Category and press BND/LCU
button (13).
In Category mode, ohannels oan be
tuned within the same oategory.
- When the user wishes to searoh by
Category, press LCC/XM-MCD button
(2) oan be pressed until it goes into
Category searoh mode.
- Press M6 button (25) or M5 button (24)
up and down to get to the desired
oategory.
- To ohange ohannels, press LCC/XM-
MCD button (2) again to Normal mode,
and then press TUNE/TRACK^w
button (17) or TUNE/TRAC^M-^ button
(16) to seleot the ohannel up or down.
How to direct tune
1. In direct mode, display shows DIRECT
and the channel number.
2. Use^^ button (17) or«^ button (16)
to select the channel.
3. Press BND/LCU button (13) to direct
tune.
12