Automatic horn alert (nam option), Function review, Automatic calls in absence indicator – Audiovox SBC Series User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/726057/12/background.png)
AUTOMATIC
HORN ALERT
(NAM OPTION)
This feature, when wired to the vehicle, indicates the
incoming call by sounding the horn or by flashing the
lights. When on, the Automatic Horn Alert will
automatically set each time that the car ignition is
turned off.
1.
Press
I
FUNC
I. then key . I
HORN
I
will appear on
the display and the Automatic Horn Alert mode
will he on. Each time the ignition is turned off, this
feature will he set automatically.
2. When a call is received, the unit will either sound
the horn or flash the lights five times, depending
on how the horn alert wire has been connected to
the car.
3. This mode wilt be off in the following cases :
1)
When
iFUNCj
and then key are pressed
again.
2) When the Automatic Calls In Absence Indica
tor mode is set.
4. This feature is deactivated in the following cases :
1)
By turning the ignition to on or accessory
position.
2) When the safety timer (8 hours) expires.
Note(l); Deactivate this mode if it is not being used
as this feature remains activated even if
the power source is turned off.
Note(2): The power source is automatically turned
off to prevent the discharge of the car
battery after 8 hours.
AUTOMATIC
CALLS IN ABSENCE
INDICATOR
This feature indicates the number of incoming calls
while you are out of the car. When automatic
Call-in-Absence is on, it will be activated when the
ignition is turned off.
1.
Press
I
FUNC
I
. then key
.
I
Call
I
will appear in
the display. However, this mode is not activated
unless the ignition switch is turned off.
2. Turn the ignition switch off and leave the tele
phone switch on. If necessary, lock the unit.
3. When calls are received, the unit will indicate
them by flashing [
CALL
I
and
IXXj
(XX being the
number of calls) alternately in the display.
4. This mode will be off in the following cases :
1)
When
iFUNCi
and then key are pressed
again.
2) When the Automatic Horn Alert is set.
5. This feature is deactivated in the following cases :
1)
By turning the ignition to on or accessory
position.
2) When the safety timer (8 hours) expires.
6. The
I
CALL
I
and
|XX|
will continue flashing until
any key is pressed or the handset is lifted.
Note(l):
Deactivate this mode if it is not being used
as this feature remains activated even if
the power source is turned off.
Note(2): The power source is automatically turned
off to prevent the discharge of the car
battery after 8 hours.
FUNCTION REVIEW
This feature shows you which numbered keys to use
for different FUNC/RCL key functions.
To review the function menu:
Press
I
FUNC
I
for about one second.
Scroll the menu up or down, using the [#1 or
key respectively.
The display information will appear as follows.
[Lock ]
[Horn ]
[Call ]
[A.Ans]
[HF
]
[Mute ]
[Tone ]
[ABsys]
[Timer ]
[RF CH]
[Light]
[Alert]
[Restr]
[ID 1
DISPLAY
[FUNC 1
[FUNC 2
[FUNC 3
1 - 2
0
[FUNC
[FUNC
[FUNC
[FUNC
[FUNC
[RCL ^1-3
[RCL ^ 4
[RCL ^ 5
[RCL ^ 6
[XYZ FUNC#
[<1D>FUNC
FUNCTION
]Lock
]Horn
iNumber of Calls in Absence
Indication
] Automatic Answerirg
] Hands-free Adjustment
]Mute
]DTMF Tone Mute
4 ] A/B System Selection
]Call Timer
]RF Channel Indication
] Backlighting Control
] Alert Volume Control
7 jCall Restricted Mode
6] Multiple City Registration
Note (1) : XYZ = Three-digit Security Code
Note (2) :
Phone Number
22
23