Avanti W1092F - Manual (Page 8)

> Positioning the Drain Hose
The end of the drain hose may be positioned in three ways:
Over The Edge of A Sink. ^
The drain hose must be placed at a height of between 2 ft. and 3 ft. To keep the drain hose spout bent,
use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the faucet with a piece
of string to prevent the drain hose from moving.
In A Sink Drain Pipe Branch
The drain pipe branch must be above the sink siphon so that the end of the hose is at least 2 ft above the
ground.
in A Drain Pipe - ■
We recommend you use a 2 1/2 ft high vertical pipe; it must be no shorter than 2 ft and no longer than 3 ft.
The inside of the drain pipe must be wider than the diameter of the drain hose.
Warning
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized Avand Products service center.
This appliance should be property grounded for your safety. The power cord of this appRance is equipped with a
three-prong plug which mates with standard three prong wall outlets to minimize the possiJiTrty of electrical shock.
Do iwt under any circumstances cut or remove the third ground prortg from the power cord supplied.
Use of extension cords is ret recommerxJed.
This appliance requires a standard 1 lS'l20vott, 60Hz electncaJ outlet with three-prong ground.
The cord should be secured behind the appliance and not left exposed or danglirtg to prevent accidentcii injury.