Avanti W1092F - Manual (Page 15)

ёштг^-
PROBLEMS WITH YOUR WASHER?
You can solve many common appliance problems easily, saving you the cost of a possible service call Try the
suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
PROBLEM ! POSSIBLE CAUSE
Washer does not operate. 1 Not plugged in.
The circuit breaker tripped or blown fuse.
Door is not dosed.
, Make sure the water source is turned on.
1
No water or insuffident water supply. The water source faucet is not turned on.
The water source hose Is frozen.
The water intake hose is bent.
The filter on the water intake hose is clogged.
'■ ■■ * ■—■“------------------------------------------------ ------------
Detergent remains in the detergent drawer
after the wash program is complete.
The washing machine is running without
sufficient water pressure.
The washing machine does not drain and/or spin.
1
1
j
1
The drain hose is squashed or bent
The water hose mesh filter is clogged.
Washing machine vibrates or is too noisy.
Check to assure that the washer is level.
The shipping bolts were not removed.
The washing machine is touching another object.
The laundry load is not balanced.
Understanding error messages
Error displayed Solution
•Close the door.
KE2
KE4
• Make sure the source water faucet is turned on.
• Check the water pressure.
• Clean the debris filter.
• Make sure the drainage hose is installed correctly.
Laundry load is unbalanced; loosen any tangled laundry.
/
Only if one bathrobe or jean needs washing at one time,
final spin result might not be good and 'E4" error message
will be show in the dispjay window.
Й5)