K. shut down instructions – American Dryer Corp. AD-385 User Manual

Page 35

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Non Coin (OPD Models

1. Mechanical Coin Meter Models

a. Turn power on to the dryer.

b. Insert coin(s) - Rotary Meter type ONLY.

c. Select temperature by using rocker switch and selecting "HI TEMP", "LO TEMP", or "PERM PRESS".

d. Press "Push To Start" button to start the cycle.

e. Upon completion of the drying and cooling cycles the dryer will shut off.

NOTE: If the door is opened during a cycle, both the heat and motor will stop. Continuation of the

cycle will only resume after the door has been closed, and the "Push to Start" button is pressed.

2. Dual Timer Models

a. Turn drying timer knob (clockwise) for a time of 20 minutes.

b. Select "High Temp."

c. Push "Push To Start" button.

d To stop dryer, open the main door.

K. SHUT DOWN INSTRUCTIONS

If the dryer is to be shut down (taken out of service) for period time, the following

MUST BE

performed:

1. Discontinue power to the dryer either at the external disconnect switch or the circuit breaker.

2. Discontinue the gas supply:

a. SHUT OFF external gas supply shut off valve.

b. SHUT OFF internal gas supply shut off valve.