Dixon Grizzly SE 966516601 - Manual (Page 18)

CONTROls
18
This operator’s manual describes the Dixon Zero
Turn Rider. The rider is fitted with a Kawasaki four-
stroke overhead valve engine developing 29-34 horse
power*. Transmission from the engine is made via belt-driven
hydraulic pumps. Using the left and right steering
controls, the flow is regulated and thereby the
direction and speed.
Control Locations
1
2
3 4
5
6
8
9
10
12
7
11
13
Motion control levers 1.
Left tracking bolt 2.
Parking brake 3.
Left fuel tank 4.
Fuses 5.
*The power rating of the engines indicated is the average net power output (at specified rpm) of a typical production engine
for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this value. Actual
power output for the engine installed in the final machine will depend on the operating speed, environmental conditions and
other variables.
Right fuel tank 6.
Choke control 7.
Hour meter 8.
Ignition switch 9.
Throttle control 10.
Blade switch 11.
Seat adjustment lever 12.
Right tracking bolt 13.
Deck lift 14.
Deck release 15.
8066-002
14
15