Dixon Grizzly SE 966516601 - Manual (Page 50)

lUbRICaTION
50
12/12 Every year
1/52 Every Week
1/365 Every day Lubricate with grease gun
oil change
Filter change Level check
8065-035
Lubrication Schedule
General
Remove the ignition key to prevent unintentional
movements during lubrication.
When lubricating with an oil can, it must be filled with
engine oil.
When lubricating with grease, unless otherwise stated,
use high grade molybdenum disulphide grease.
For daily use, the machine should be lubricated twice
weekly.
Wipe away excess grease after lubrication.
It is important to avoid getting lubricant on the belts
or the drive surfaces on the belt pulleys. Should this
happen, attempt to clean them with spirits. If the belt
continues to slip after cleaning, it must be replaced.
Gasoline or other petroleum products must not be
used to clean belts.
*
Change hydraulic drive filters.
p Change engine oil every 50 hours.