Programming the remote control, Code entry, Press press the – DirecTV HAH-SA User Manual

Page 22: Use the, Pane under the

Using the remote control

Programming the
remote control

You can operate your TV, VCR, SAT, AUX device, or DVD (HRMC-11 and
HRMC-12 only) devices using your remote control. Use the Code Entry or
Code Scanning method to program the remote control. Using the Code entry
method may be quicker, but you’ll need to know the correct manufacturer’s
control codes for each component you want to operate. Code scanning may be
more time-consuming, but you don’t need to know manufacturer’s control
codes.

1. Keep your remote control aimed at the device you want to control during

this process. The remote control will send out the “power” command for the
device being programmed.

2. Press and hold the device key (for example,

)

3. Press press the

MUTE

key for two seconds.

4. Release both keys.

The device key should light and remain lit. If it doesn’t remain lit, repeat
steps 1 through 4 above.

5. Choose one of the programming methods described below:

Code Entry

Use the

REMOTE

pane under the

System Setup

menu tab to program your

HRMC-11, HRMC-12, or HRMC-13 remote control to operate your TV, VCR,
SAT, AUX device, or DVD (HRMC-11 and HRMC-12 only). The AUX menu
button can be used to control a CATV box or other type of device. Use the menu
buttons to choose the desired type of device and display a brand name menu list
from which you can select the manufacturer of your device.

Device codes appear in the menu pane for the brand selected. Step-by-step
onscreen help guides you through the procedure. Appendix B – Manufacturers
device control codes, on page 41 also provides a complete list of device codes.

REMOTE

Install

Signal

Wed, Oct 30 11:53AM

Features

Prefs

New Card

Test

Info

Upgrade
Watch TV

VCR

Main Menu

Remote Control Settings

Remote

AUX
VCR
DVD

Factory Defaults

Remote ID

Unit 1

Brand

A Mark

Amstrad

Anam
AOC
Audiovox

Akai

Blaupunkt

Highlight the device you want to

select. Press

SELECT

001, 034, 038, 083, 199

1. Aim your remote control at the

TV you want to use.

2. Hold down the TV button.

3. Press the MUTE button for one

second.

4. Release both buttons together.

5. The TV button glows and

remains lit. If the button does not