Sening the sleep timer, Care and maintenance, 1 press the sleep button – Aiwa AV-X200 User Manual
Page 16: Setting the sleep timer, Sening the sleep timer care and maintenance
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEniNG THE SLEEP TIMER
CARE AND MAINTENANCE
Occasional care and maintenance of the unit is needed to
optimize the performance of your unit.
To clean the cabinet
Use a soft dry cloth.
If the surfaces are extremely dirty, use a soft cloth lightly
moistened with mild detergent solution. Do not use strong
solvents, such as alcohol, benzine or thinner as these could
damage the finish of the unit.
The unit can be automatically turned off at a specified time.
Use the remote control.
1 Press the SLEEP button.
;
/ i
;
/ ;
■ / ; ; ;
2 Press the UPA or DOWNT button within four
seconds to specify the amount of time until the
power turns off.
Each time the button is pressed, the time changes between 5
and 240 minutes in 5-minute steps.
Specified time
; :
;
;
■/ i i
!
/ i
To check the time remaining until the power turns off
Press the SLEEP button once. The remaining time is displayed
for four seconds.
To cancel the sleep timer
Press the SLEEP button twice so that “SLEEP” on the display
disappears.
15
ENGLISH