Atlantis Land A05-19BM-F02 - Manual (Page 7)

Recommended Use of the Monitor
• Power
- Use the type of power indicated on the marking label.
• Plugs
- Do not remove any of the prongs of the monitor's three-pronged power plug.
- Disconnect the power plug from the AC outlet if you are not going to use it for an
indefinite period of time.
• Power cords
- Use the proper power cord with correct attachment plug type. If the power source
is 120 VC, use a power cord that has UL and CSA approvals. If the power source
is a 240 VAC supply, use the tandem (T blade) type attachment plug with ground
conductor power cord that meets the respective European country's safety
regulations, such as VDE for Germany.
- We recommend using the power cord supplied with the product. However, if
another type of power cord is required power cord H05VV-E or VW-1, 18AWG x
3G should be used.
- Do not overload wall outlets or power cords. Ensure that the total of all units
plugged into the wall outlet does not exceed 7 amperes.
- Ensure that the total ampere ratings on all units plugged into the extension cord is
not above the cord's rating.
- If the power supply cord which came with your monitor is to be connected to the
PC instead of the wall outlet, this equipment should be used with UI7TUV approved
computers with receptacle rated 100~240V AC, 50/60Hz, 1.1A (minimum).
- Do not allow anything to rest on the power cord. Do not locate this product
where persons will walk on the cord.
• Environment
- Place the monitor on a fiat level surface.
- Place the monitor in a well-ventilated place.
- Keep the monitor away from:
rain or water
overly hot, cold or humid places
sunlight
dusty surroundings
equipment that generates strong magnetic fields
INTRODUCTION
5
♦ ♦ ♦