Step 14-attach lp cylinder to grill - (all models), Fig. l, Step 14“ attach lp cylinder to grill – Aussie LP 7462 User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

STEP 14-ATTACH LP CYLINDER TO GRILL -

(ALL

MODELS)

•Fiii empty LP Cylinder at your local LP gas supplier.

•Set bottom ring of LP Cylinder into Cylinder Bracket through round hole in Bottom Shelf (Fig. K ).

Turn Adjusting Knob clockwise to secure LP Cylinder inside Cylinder Bracket(Fig. K).

•Turn ail control knobs and LP Cylinder valve to the “Off’ position.

•Take the protective cap off the cylinder valve. (Fig. L) Hold Regulator in a straight line with LP

Cylinder valve so the connection does not cross thread. Insert nipple into the cylinder valve. Hand

tighten coupling nut in clockwise direction. Do not use tools.

•Make sure Regulator hose does not contact hot metal surfaces.

^ WARNING: Do not use grill if this connection can not be completed. Be sure to test

this connection for gas leaks before operation of Gas Grill.

ROUTE HOSE UNDER
BRACE ON MODELS

WITH WOODEN LEGS

CYLINDER

ADJUSTING

KNOB

REGULATOR

TURN REGULATOR COUPLING

NUT CLOCKWISE TO TIGHTEN

ROUTE HOSE ON

OUTSIDE OF LEGON
ALL MODELS

FIG. K

GAS

VALVE

FIG. L

PROTECTIVE CAP