Operation – Arcam Delta 250 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DELTA 250 ONLY
DIGITAL CONNECTIONS
The Delta 250 is fitted with a choice of 3
digital cormectors. Use the appropriate
connector for youi DAC.
© PHONO OUTPUT - Connect to the
DAC’s digital input using a suitable
digital cable. Both outputs are identical
and can be connected simultaneously if
necessary.
@ BNC OUTPUT - Connect to your
DAC's BNC digital input (if fitted)
using a suitable digital cable. This
output generally gives better results
than output
© OPTICAL OUTPUT - Connect to
your DAC's optical input (if fitted)
using a suitable Toslink type optical
cable. You should try digital outputs
(D, ® and optical output ® to
detemune which you prefer.
© SYNC LOCK INPUT - Connect to an
Arcam Black Box fitted with the Sync
Lock facility using a suitable Toslink
type optical cable. The Sync Lock
connection synchronises the Delta 250
and the Black Box autoniaticaliy. The
Sync Lock led (Light emitting diode) on
the Bbck Box's fiont panel will confirm
this.
Using the Sync Lock connection
removes the timing error? generated in
the digital signal connections, and
should be used in order to achieve the
very best sound quality.
tD
PORT
FOR
AT&T
OPTICAL
OUTPUT MODULE - The AT&T
optical system offers superior sound
quality compared to the Toslink system
due to its wider bandwidth.. It has the
advantage over the co-axial outputs by
being virtuaHy interference free.
It can rival, and in many cases surpass
the quality of the co-axial outputs. If
your DAC is fitted with an AT&T
input you may wish to take advantage
of its benefits. The AT&T module is
available as an optional extra, and can
be supplied and fitted by an Arcam
dealer.
OPERATION
® DISC DRAWER - Accepts both 8 cm
and 12 cm discs. Place the disc in the
tray label side uppermost.
® LOAD - Opens and closes the disc
drawer. The drawer can also be dosed
by gently pushing it in approximately
5mni. The drawer will then close by
itself and engage PLAY mode (if a disc
is loaded).
© PLAY - Press to play a disc or
programmed selecdon. Pressing PLAY
when the disc is already playing wiH
restart the same track. To restart the
disc fi:om track 1, press STOP and then
PLAY,
STOP - Press once to stop the disc.
Pressing STOP twice will cancel
selections
programmed
into
the
memory.
© PAUSE - Press to pause the disc. Press
PAUSE again to resume play.
<<
t>> - To search for a particular
passage during play, press >>. © FAST - For fast search press FAST ('FAST’ will appear on the display). << or >> to engage fast search.
Now press