A&D Digital Platform Scales FG-60KAM - Manual (Page 15)

9. FUNCTIONS
The scale has Function settings to expand your applications.
The parameters set in the Function settings are maintained even if the power switchei
off.
\ 1 / I
c / _ : : 1 1
/ 1
■'
1 ^
V / l - i _____
Item \ Parameter
9-1. The procedure for setting parameters
1. Turn the power off.
2. Press and hold the
power on via the
ZERO
ON/OFF
switch and turn the
switch. Then, the first
function item and its parameter is displayed.
PRINT switch. 3. Set the parameter value using the
□ If you do not need to change the parameter, go to next
step without setting.
4. Press the MODE switch. Then the display goes to
the next function item.
U In this stage, the new parameter is not stored in
the scale yet.
O To end changing the parameters, turn the power
off.
5. Repeat the steps 3 and 4 to the last item.
7. Press the MODE switch again. The parameters are
stored in the scale, and the scale will automatically boot
up.
O If you turn the power off before this step is done,
none of the parameters will be changed.
C
C
6. After setting the last item, press the MODE switch.
Then, End will appear.
s..
\ I /
::
- I -
/ 1 \
U /
2/ 1:1
-1.1
/1 \
C J _
\TT
/ r;
-
./1 \
C _ J
L / ILI
14