Concord Camera 4340z - Manual (Page 41)

-38-
Macintosh
1. In the Apple Menu on the Menu bar, select About this Computer.
2. A window will appear with the computer’s operating system version. Confirm that your
computer is version 9 or higher.
No installation of software is necessary for Macintosh users, please go to Page 4 7 for
connecting your camera to the computer.
Do not connect the camera to your computer BEFORE the camera drivers and
Microsoft DirectX 9 installation is completed.
Step 1 Make sure your camera is powered off and not connected to the computer.
Step 2 Make sure the computer is powered on and Windows 98 or 98SE is running.
Step 3 Close any other applications or software you may be running.
Step 4 Insert the supplied CD-ROM into your computer’s CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after
the CD-ROM has been inserted, click on “My Computer” either on the
Desktop or in the Start Menu and locate the CD-ROM Drive. Double click on
the CD-ROM Drive icon for installation and proceed to Step 5.
Step 5 Select the language. Click [OK]. (fig . 1.1)
Step 6 The installation screen will appear. Click on Install Camera Drivers. (fig . 1.2)
Step 7 Click [Next >]. (fig
. 1.3)
INSTALLING THE DRIVER AND DIRECTX 9 –
WINDOWS 98/98SE
f ig . 1.1
fig . 1.2