Concord Camera 4340z - Manual (Page 34)

-31-
Setting the File No. Reset to OFF is useful for avoiding file name duplication when files are
downloaded to a computer. However, if you want to start numbering files from 0001 after
a new SD card is inserted, or after the memory is formatted, or when you experience a
““FILE NUMBER OVER” warning (p. 31), set the File Number Reset mode to ON.
Mode
Situations
Off (Default) On
1. A new SD card is
inserted.
2. The internal memory or
the memory card is
formatted
File number will start from
the previous number. For
example:
0065 0066
File numbers will reset to
0001. For example:
0065 0001
To numbering the files from 0001 when a new SD card is inserted:
1. Insert a new SD card.
2. Turn the camera on and press the button.
3. Press the or arrow to select the REC
Menu.
4. Press the or arrow to select File
NO. Reset then press the SET button or
arrow to enter its submenu.
5. Press the or to select On and then
press the SET button.
6. Press the button twice to close the
menu window.
To number the files from 0001 when memory is formatted:
1. Follow steps 2-6 above to set the File No. Reset to ON mode.
2. Format the memory. (Refer to p. 9)
File Number Reset