I safety precaution and important items – Beko MF 5 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

I Safety precaution and important items
! This product has been designed for only homes.
* The current value of the fuse in your home shall be suitable
to the current drawn by your cooker.
* Before your appliance is connected to the mains electricity
supply, check to ensure that the voltage and the frequency
shown in the data plate corresponds with your power supply.
* Our company shall not held responsible for any damage caused
by the utilisation of the cooker without ground cabling.
* Before your appliance is connected to the mains electricity
supply, check to ensure that the voltage and the frequency
carresponds with your power supply.
This appliance must be earthed.
* The mains lead must not come in contact with any part of the
appliance which is hot during operation.
* During operation of this appliance the door and outer surfaces
will get hot. Take care not to touch hot surfaces during use.
* Keep your children away from the parts are heated
while grilling or when the oven is on.
Before using your product take the packaging materials
out.
The packaging materials can cause danger for the children.
* A perceptihle odor is going to emit from the insuiation
materials and heating elements.
In order to hum off the protective coating remove shelf
and baking tray and turn the oven control knob to 200°C
and run the oven for approximately 15 minutes again
fumes will be emited as the protective coating Is burnt
off but this is quite normal.
* Never touch the appliance with wet hands. If there is a
water spillage, water droplets or condensation on the
appliance, switch the appliance off and wipe it dry
thoroughly.
* Always use oven gloves when removing the grill rack
and dishes from inside the oven when in use.
* Always switch off the appliance from the mains when
the appliance is not in use, before cleaning or in the
unlikely event of a product failure becoming apparent.