Arcam SA200 User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Contents
Introduction
1
Installing and using your SA150/SA200
2
Back Panel connections
2
Front Panel controls
4
Fitting or changing side cheeks
5
Technical Details
6
Spares Kit
6
Input Connector Wiring
6
Fuses
7
Removal of Top Cover
9
SA150 Technical Specification
10
SA200 Technical Specification
11
Guarantee for UK sales
Inside back cover
Important Notice
1. If your SA150 or SA200 is not delivered fitted with solid wood side cheeks it will
instead be supplied with thin, black, metal transit panels. These must be removed
and the appropriate wood side cheeks fitted before the amplifier is first used. See
page 5 for full details.
2. Please retain the carton and all packing materials provided with this equipment so
that it may be repacked correctly if it ever becomes necessary to transport the unit or
to return it for service.
,
3. If servicing is required then the equipment should be properly packed and returned
to the dealer from whom it was purchased. It is essential to include a covering letter
giving your name and address and a brief but thorough description of the fault.