Bolens 522 User Manual
Owmeirsgum, Vertical log splitter model 522, Assembly • operation • maintenance
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OWMEirSGUM
• ASSEMBLY • OPERATION • MAINTENANCE •
VERTICAL
LOG SPLITTER
Model 522
IMPORTANT!
Record the exact
Model No.
and
Serial No.
which appear on the frame of your unit in the
space below. You
must
have these numbers,
along with the date of purchase, in order to
receive warranty or service.
Important:
Read Safety Rules
and Instructions Carefully
MEETS ANSI SAFETY STANDARDS
MODEL NO.
SERIAL NO.
247
G
522
G
Made
^
Made
in
AMERICA
WARNING:
This unit is equipped with an internal combustion engine and should not be used
on or near any unimproved forest-covered, brush-covered or grass-covered land unless the
engine’s exhaust system is equipped with a spark arrester meeting applicable local or state
laws (if any). If a spark arrester is used, it should be maintained in effective working order by
the operator.
In the State of California the above is required by law (Section 4442 of the California Public
Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A
spark arrester for the muffler is available through your nearest engine authorized service
dealer or contact the service department, RO. Box 368022, Cleveland, Ohio 44136-9722.
FORM NO. 770-0365M
Document Outline
- OWMEirSGUM
- • ASSEMBLY • OPERATION • MAINTENANCE •
- VERTICAL LOG SPLITTER
- RULES FOR SAFE OPERATION
- ASSEMBLY INSTRUCTIONS
- Tools Required for Assembly
- Tongue Assembly
- UNPACKING
- INSTALLATION OF WHEELS
- AHACHING TONGUE TO RESERVOIR TANK
- ATTACHING THE BEAM SUPPORT/
- LATCH BRACKET
- INSTALLING THE HITCH
- ATTACHING THE WEDGE, BEAM AND CYLINDER ASSEMBLY
- AHACHING THE ENGINE AND PUMP ASSEMBLY
- AHACHING THE CONTROL HANDLE
- ATTACHING THE HOSES
- FINAL ASSEMBLY
- OPERATION
- ADJUSTMENTS
- MAINTENANCE
- OFF-SEASON STORAGE
- HOW YOUR LOG SPLITTER OPERATES
- TROUBLE SHOOTING GUIDE
- ASSEMBLY INSTRUCTIONS
- 800-800-7310