Assembly instructions for optional handle – Bolens 118-620A User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY INSTRUCTIONS
FOR OPTIONAL HANDLE
7. Secure top of handle
panel
to
throttle
clamp. \
>
10. Slip hand grips on the upper end of each
handle. They will slip on more easily if you
first soak them in warm soapy water.
5. Place speed nut on throttie ciamp.
3.
Secure
throttie
controi to handle
panel as shown.
4.
Assemble
throttle
clamp to upper han
dle.
6. Assemble bottom of handle |
mhi
^ to
handle.
9. Check ALL nuts and bolts for correct
tightness.
2. Fasten upper handles to lower
handle. Fasten with cap screws
and locknuts. Do not tighten. Use
lower holes only.
NOTE
It may be necessary to bend the ends of
the lower handle inward slightly to
assure a snug fit against the deck
mounting area.
1. Attach lower handle to wheel
brackets. Secure with hair pin cotter.