Avanti 1292YWT - Manual (Page 5)

Placing and Installation
Choosing the Right Place
Place the appliance in a dry and regularly ventilated room. The allowed
ambient temperature depends on the model (class) of the appliance and is
listed on the rating plate of the appliance.
Class Ambient temeperature
N (normal) from 62°F to 90'F
ST (sub-tropical) from 64°F to 100*F
T (tropical) from 64‘F to 120°F
The appliance may be exposed to higher temperatures (up to 24 hours) or
lower temperatures (up to 12 hours), but not lower than +41T.
In case the appliance is exposed to temperatures lower than 62T, the
operation of the refrigerator is normal, yet the temperature in the freezing
compartment is raised which shortens the storage time of the frozen foods.
Never place the appliance near heat emitting devices (e.g. stove, radiator,
water heater or similar devices) and do not expose it to direct sunlight.
Placing the Appliance_______________________________________
• Place the appliance firmly on a solid base and if necessary level it with the
two adjustable feet, located on the front (Fig.1).
• The appliance has two spacers that should be inserted into the opening on
the rear wall of the appliance, which makes it impossible for the appliance
to be pushed too close to the wall (Fig, 2).
Connection to Power Supply
Connect the appliance with the cable and plug to the power supply socket
outlet with a ground terminal (safety socket).
"DO NOT USE EXTENSION CORD"
Required nominal voltage and frequency are indicated on the rating plate.
The connection to the power supply and grounding have to be made
according to current standards and regulations. The appliance resists
temporary voltage tolerance up to -15 to +10 %.
Instructions for Use