Before putting into use, Instructions for use, We care for the environment – Avanti 1292YWT User Manual
Page 3: Tips for energy savings, Important
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Before Putting Into Use
О
• Before connecting the appliance to the mains supply, leave It stand for
about 2 hours, which will reduce a possibility of malfunctions in the cooling
system due to transport handling.
• Clean the appliance, and be thorough, especially in the interior (See
Cleaning and Maintenance).
• In case the interior accessories are not correctly placed, rearrange them
as described in chapter "Description of the Appliance”.
Instructions for Use
These instructions for use are intended for the user. They describe the
appliance and its correct and safe use. They were prepared for various types
of refrigerators therefore you might find in it description of some functions
and accesories that your appliance does not include.
We Care for the Environment
Our appliances are distributed in packaging made of environmental
friendly material which could safely be recycled, disposed off or destroyed,
with no effects on the nature whatsoever.
These instructions are printed either on recycled paper or chlorine free
bleached paper.
When you find your appliance is out of use and no longer needed, try not
to burden the environment with it. Call your nearest authorised "collecting
service for used appliances".
Tips for Energy Savings
Try not to open the door too often, especially when the weather is wet and
hot. Once you open the door, mind to close it as soon as possible.
Every now and then check if the appliance is sufficiently ventilated
(adequate air circulation behind the appliance).
Use higher thermostat settings only when required or recommended.
Before loading the appliance with packages of fresh foods, make sure they
are cooled to ambient temperature. .
Ice and frost layer increase energy consumption, so do clean the
appliance as soon as the layer is 3~5 mm thick.
Important
If you have bought this appliance to replace an old one equipped with a
lock that cannot be opened from inside (lock, bolt), make sure that the lock
is broken. This will make it impossible for children to lock themselves
inside the appliance and suffocate.
Instructions for Use