To place a call with a number in the memory, Speed dialii, Last number redial – Audiovox MVX-430 User Manual

Page 13: Programmable emei^ency call (nam option), One touch emergency call

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

To Place a Call with a Number in the

Memory

Press then enter the memory address (01

through 30). The last 8 digits of the number will

appear on the readout. If the number is longer than

8 digits, hold down the second digit of the memory
address (after pressing ®) to see the prefix.

Note: See “To Recall a Ntimber from Memory” and

“To Review the Prefix” for more details.

2. Press *5^. The HNUSEl indicator will light as the call

is placed.

Speed Dialii^

This feature permits you to place a call from the stored

memory locations without using the recall ® key.
Speed dialing is a quick method of placing calls finm
memory.

1. Enter the one or two digits of memory address (1

through 9 and 10 through 30).

2. Press The last 8 digits of the phone number will

appear on the readout, and the HNUSEl indicator will
light.

Last Number Redial

This feature permits you to redial any of the last phone
numbers you attempted to call.
Numbers will be stored in memory only if key
is pressed.

1. Press ®, <£) then ^D.

2. Press to send a displayed number.
Note: To clear the stored number, press @i, then

Programmable Emei^ency Call

(NAM Option)

This feature permits you to place a call to two emergency
numbers (maximum of 7 digits) even if your telephone has
been locked.
The two emergency numbers must be pre-programmed in

the NAM.

Note: 911 is preset emergency number, (you may change

this number if you wish.)

Operation in Lock Mode

1. Enter the emergency call number (911); ©(©O

(“911” does not indicate, but the ILOCKI indicator wiU

light.)

2. Press the liN USEl indicator wiU Ught.

To terminate the caU, press
(The llNUSEl indicator wiU go out.)

One Touch Emergency Call

This feature permits you to place a caU to an emergency
number by a single key stroke, even when the unit is in
lock mode. You can deactivate this feature to prevent
unintentional caU by mistake.

emergency number that is pre-programmed in the

NAM wiU be displayed, and IIWXTSEI indicator wUl light

as a call is placed. The factory pre-set number is 911.

If you wish to deactivate this feature, press the follow
ing key sequence.

[ x f Y l Z l

(XYZ is Security Code)

To activate this feature again, foUow the same key

sequence.

When this mode is ON

1- K l f i R I | o I n 1

l f l

1 o 1 ^ 1