Installation, Step 5 – Atech Flash Technology PRO-GEAR XM-4U User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
(1) Determine which wires you need to remove from the
black pin connectors first by referring to your motherboard
USB header pin layout.
(2) Using a needle or push pin to flip up the tiny plastic tab
and pull the wire out from the connector. Please take caution
on this step as excessive force on flipping the tab may cause
the tab to break.
(3) Repeat above step for each wire that requires changing.
(4) Insert the wire pin back into the correct slot and press the
tiny plastic tab down will hold the wire in its position.
Step 5
Install software driver
This step is required for Windows 98SE and Windows 2000
users only. If you have Windows ME or Windows XP, please
skip this step and proceed to Step 6.
(1) Close all application you are running, including
applications running in background.
(2) Insert AFT Setup CD into your CD ROM drive and
locate a setup.exe file in PC setup folder.
(3) Double click on setup.exe will lead you into setup
program.
(4) Follow setup instruction on your screen.
(5) After driver files are copied into your system, setup
program will prompt you to restart your computer. Please do
so.
(6) Once computer is restarted, you can proceed to Step 6