Example, Installation – Atech Flash Technology PRO-GEAR XM-4U User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
li.
Depending on the pin layout on your motherboard USB
header, it may be necessary rearrange the color wires of
Internal USB cable to match the USB pin assignment.
Please refer to your motherboard manual for USB header
pin assignment information.
Internal USB cable is consist of 2 sets of Red, White, Green
and Black wires. Each color wire shall be connected to a
specific pin on the USB header.
Red wire = Power (VCC)
White wire = P- (Data-)
Green wire = P+ (Data+)
Black wire = Ground (GND)
Black wire #2 = Ground (GND) [Optional connection]
«< Example »>
Here is an example base on the motherboard we have.
According to the motherboard manual, we have following pin
information on USB header:
Pin 1 = USB Power
Pin 2 = USBP2-
Pin 3 = USBP2+
Pin 4 = GND
Pin 5 = NC
Pin 6 = USB Power
Pin 7 = USBP3-
Pin 8 = USBP3+
Pin 9 = GND
Pin10 = NC (No pin)