Installation – Atech Flash Technology PRO-GEAR XM-4U User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
step 1
Open computer case cover. Please refer to your computer
manual if necessary.
Step 2
Insert XM-4/XM-4U unit Into an empty external 3.5" drive bay.
1"
Step 3
Like standard 3.5" floppy drive, XM-4/XM-4U unit has 3
screw holes on both sides. Apply screws on each side to
secure unit to drive.
This manual is related to the following products: