General safety precautions (continued), Maintenance and storage, Identification numbers – Bolens 520 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
GENERAL SAFETY PRECAUTIONS (continued)
13. Do not overload machine capacity by
attempting to clear snow at too fast a
rate.
14. Never operate machine at high trans
port speeds on slippery surfaces.
15. Never direct discharge at bystanders
or allow anyone in front of unit.
17. Never operate the snow thrower
without good visibility or light. Always
be sure of your footing and keep a firm
hold on the handles and walk, never run.
MAINTENANCE AND STORAGE
1.
Check engine mounting bolts, etc.
at frequent intervals for proper tightness
to be sure equipment is in safe working
condition.
16. Use only attachments and accessories 2. Check scraper bar mounting bolts at
approved by manufacturer of snow
frequent intervals for proper tightness to
thrower.
insure smooth operation.
3. Never store machine with fuel in the
fuel tank inside a building where open
flame or spark are present. Allow engine
to cool before storing in any enclosure.
4. Always refer to owner's guide
instructions for important details if snow
thrower is to be stored for an extended
period.
5. Run machine a few minutes after
throwing snow to prevent freeze up of
collector/impeller.
IDENTIFICATION NUMBERS
Snow Thrower:
Model Number_
Serial Number_
Engine:
Model Number.
Serial Number-
Spec. Number_
For prompt service when repairs or adjust
ments are required, your AUTHORIZED
BOLENS DEALER must have identifi
cation numbers listed. Fill in the spaces
now for quick reference.
The AUTHORIZED BOLENS DEALER
has a parts list for your snow thrower. He
can identify and supply any parts you
require. Contact the engine manufacturer's
authorized dealer when engine parts are
needed.
Date of Purchase:.